Determining Wear – The CC Wear Table

To help determine if your vehicle has excess wear, we have provided the CC Wear Table. This table will give you a better idea of whether your vehicle has excess wear prior to your vehicle inspection. An approved inspection will still be required before you turn in your vehicle. You may take into consideration the condition of your vehicle when assessing which end-of-lease option works best for you.

Normal Exterior Wear

Cracks, scrapes, scratches, dings, dents, rust/corrosion and sub-par repairs

  • Individual instances of damage over two inches if the cost to repair does not exceed $100
  • Scratches that can be buffed out during reconditioning
  • Single instances of damage two inches or less in diameter, excluding hail damage and punctures

Glass windshield

Cracks, stars or stone chips 1/2 inch or less in diameter

Glass/Lenses: lights, turn signals and lamps

Cracks two inches or less

Tires

  • Tread of at least 4/32 inch when measured at the shallowest point
  • Tire type/size must comply with manufacturer’s recommendations

Wheels

Scuffs or minor nicks to wheels or wheel covers

EXCESS EXTERIOR WEAR

Structural / Unibody / Frame

Absent or nonfunctional exterior parts are chargeable in all instances

Cracks, scrapes, sratches, dings, dents, rust/corrosion and sub-par repairs

  • Excess overspray, conspicuous sand/grinding marks, uneven texture or poor color match greater than two inches in diameter
  • One or more occurrences of body, bumper or molding damage greater than two inches in size
  • Punctures or cracks to painted surfaces that will exceed $100 to repair
  • All substandard repair or damage that comprises the safety or structural integrity of the vehicle
  • Any defect that reduces market appeal or impairs vehicle appearance

Glass windshield

Damage greater than 1/2 inch in diameter or any hole

Glass/Lenses: lights, turn signals and lamps

Cracks exceeding two inches

Mechanical/Electrical vehicle maintenance

  • Incomplete or subpar repairs
  • Any vehicle system/mechanical failure caused by noncompliance with manufacturer’s recommended maintenance program
  • Broken or malfunctioning equipment
  • Any replacement component that fails to meet manufacturer’s specifications

Tires

  • Tires in any condition that represents a risk to driver/passenger’s safety including cuts, sidewall plugs and gouges
  • Non-matching or improper tire sizes
  • Studded tires

Wheels

  • Cracked, bent, mismatched or broken wheels or wheel covers
  • Wheels/wheel covers that are not original equipment or of equal quality, function and design

Aftermarket modifications

  • Any modification to the vehicle’s performance components, suspension or fuel system
  • Any change to paint color, non-factory paint scheme or wrapping
  • Engraved, etched or tinted glass
  • Spray-on bed liners not installed by dealer
  • This list is for reference only and may not specify all instances of chargeable vehicle modifications

NORMAL INTERIOR WEAR

Burn holes

Burn holes 1/8 inch or less in diameter

Cuts, tears and singed areas

Cuts, tears and singed areas 1/2 inch or less in diameter

Stains

Removable stains

EXCESS INTERIOR WEAR

Missing equipment or broken parts

  • Any replacement equipment that does not meet manufacturer’s specifications of comparable design, function and quality
  • Any absent equipment or damaged parts (including DVDs for the GPS system, DVD player headphones, DVD remote control, convertible boot, key fobs etc.)

Burn holes

Burn holes larger than 1/8 inch in diameter

Cuts, tears and singed areas

Tears, rips, cuts and singed areas exceeding 1/2 inch in diameter

Stains

Irremovable stains or any stain that requires replacement of upholstery or carpeting